Custom Plastic Parts Molding Machine Manufacturer - J-SAP-JBF4121B-PManual fire alarm button (with telephone jack) – Baiyear

Short Description:

Product Detail

Product Tags

Feedback (2)

We emphasize development and introduce new products into the market every year for Plastic Mould Die Maker, Plastic Mold Injection Machine, Die Casting Mold Design, We acquire high-quality as the foundation of our results. Thus, we focus over the manufacture on the finest top quality goods. A strict quality management system has been created to guarantee the caliber of the merchandise.

Custom Plastic Parts Molding Machine Manufacturer - J-SAP-JBF4121B-PManual fire alarm button (with telephone jack) – Baiyear Detail:

Function Features

Built in microprocessor, Stable performance. SMT surface mounting process, high reliability and good consistency. Adopting two-bus system, no polarity requirement, ensuring low power consumption while making the transmission distance up to 1000m. Electronic encoding, addressable by a special electronic encoder. The operation is simple. Press the operation panel by hand to realize the fire alarm report to the controller. To reset the operation panel on the manual alarm button after pressing it, the special key matching the button must be used. Manual alarm button adopts new buckle structure and thin design. The phone jack is located at the bottom, and a logo guide is added on the front of the button for easy identification.

Structural features, installation and wiring

After wiring construction, the base shall be fixed on the wall through embedded boxes or expansion bolts, and the installation hole spacing is 60mm (compatible with 50mm installation hole spacing). The manual fire alarm button is connected to the controller by RVS2 x 1.5mm2 twisted pair cable. Before installation, use the encoder to write the corresponding address code (1-200). After wiring and checking, buckle the upper shell.

Description

Terminals 1 and 2 are respectively connected to loop two buses L1 and L2, and have no polarity. Terminals 3 and 4 are connected to telephone lines without polarity. Terminals 5 and 6 are normally open contacts, closed when the manual fire alarm button is pressed, which can be used to control the on-site audible and visual alarm device. It is strictly forbidden to use this contact to control high-power equipment and strong current equipment.

Specification

Content	Technical parameter
working voltage	DC19-28VController Provided, Modulation type
operating temperature	-10…+55℃
storage temperature	-30…+75℃
contact capacity	DC30V/0.1A
relative humidity	≤95%(40±2℃)
standby current	≤0.3mA（24V）
alarm current	≤1mA（24V）
Encoding	Electronic encoder coding
Coding range	1-200
Confirmation lamp	Instantaneous flashing of fire alarm light monitoring status. It is always on (red) when the alarm is pressed.
Telephone indicator light	The telephone indicator on the manual alarm will flash after being connected to the telephone system.
Dimension	90mm length×86mm width×28.5mm height
wiring system	two-BUS，Non-polarity
Executive Standard	GB19880—2005《Manual fire alarm button》
Executive Standard	GB16806-2006—2005《Fire fighting linkage control system》

Product detail pictures:

Related Product Guide:

Sticking towards the principle of Super High-quality, Satisfactory service ,We've been striving to become a superb business partner of you for Custom Plastic Parts Molding Machine Manufacturer - J-SAP-JBF4121B-PManual fire alarm button (with telephone jack) – Baiyear , The product will supply to all over the world, such as: Iraq, Kazakhstan, Ghana, Each product is carefully made, it will make you satisfied. Our merchandise in the production process have got strictly monitored, because it is only to supply you the best quality, we'll feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.

Injection Mold Custom